17:00, EEST
July 5, 2018
Hi
I am try to connect to Siemens PLC with delphi xe10
I have enable the opc ua server on the PLC.
I can connect with UaExpert and se the PLC. so the opc ua server is running.
my plc server address is: opc.tcp://10.10.101.210:4840
Application name: SIMATIC.S7-1500.OPC-UAServer:PLC_2
There is no security enable on the plc
what shall I write in the TPsOPCServer componet in Delphi!
Host-> 10.10.101.210:4840 !!!!!!
ServerName-> SIMATIC.S7-1500.OPC-UAServer:PLC_2 !!!!!!
When i Try this it says
Cannot identify server ‘SIMATIC.S7-1500.OPC-UAServer:PLC_2’ at ‘10.10.101.210:4840’ : Could not connect to OPCEnum Service at ‘10.10.101.210:4840’ : RPC-Serveren is not avilble
17:41, EEST
December 21, 2011
Unfortunately, Prosys Sentrol does not support OPC UA, yet. So TPsOPCServer can only be used with OPC Classic servers.
We have OPC UA support for Delphi in the works and hope to be able to provide it for evaluation in a couple of months.
In the meantime, your option is to use UaGateway to convert between OPC Classic and OPC UA.
Most Users Ever Online: 518
Currently Online:
17 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
hbrackel: 135
pramanj: 86
Francesco Zambon: 81
rocket science: 77
Ibrahim: 76
Sabari: 62
kapsl: 57
gjevremovic: 49
Xavier: 43
fred: 41
Member Stats:
Guest Posters: 0
Members: 681
Moderators: 16
Admins: 1
Forum Stats:
Groups: 3
Forums: 15
Topics: 1467
Posts: 6261
Newest Members:
graciela2073, sagarchau, elviralangwell4, Donnavek, Eddiefauth, DonaldPooma, fidelduke938316, Jan-Pfizer, DavidROunc, fen.pang@woodside.comModerators: Jouni Aro: 1010, Otso Palonen: 32, Tuomas Hiltunen: 5, Pyry: 1, Petri: 0, Bjarne Boström: 983, Heikki Tahvanainen: 402, Jukka Asikainen: 1, moldzh08: 0, Jimmy Ni: 26, Teppo Uimonen: 21, Markus Johansson: 42, Niklas Nurminen: 0, Matti Siponen: 321, Lusetti: 0, Ari-Pekka Soikkeli: 5
Administrators: admin: 1