I managed to connect the Prosys Monitor with my Python code to check the server communication and see if the values changed when the Python code did. It worked without any issues, as you can see in the video below.

https://cefsaedu-my.sharepoint.com/:v:/g/personal/062200020_faculdade_cefsa_edu_br/EcadB31LT71KigQxSWKp0VABRGAStb1670Nmf252cepwLw?nav=eyJyZWZlcnJhbEluZm8iOnsicmVmZXJyYWxBcHAiOiJPbmVEcml2ZUZvckJ1c2luZXNzIiwicmVmZXJyYWxBcHBQbGF0Zm9ybSI6IldlYiIsInJlZmVycmFsTW9kZSI6InZpZXciLCJyZWZlcnJhbFZpZXciOiJNeUZpbGVzTGlua0NvcHkifX0&e=9tEx9R

But when I tried to do the same with the Siemens software, I got confused about what to import when adding the OPC UA server. I found the nodes I had created, but I’m not sure if those were the right variables to import.

I’m trying to figure out how to get my Python code to communicate with the monitor and what adjustments I need to make in the monitor OPC UA or OPC UA server to send the correct information to Siemens Process Simulate.

I know it depends on the siemens software settings, but I’m unsure if I’m importing the right info from the monitor or if I need to create more tags to send the data properly to the software.

Is it possible to connect my Python code and other software to the same OPC UA server at the same?

video in connection with siemens software:

https://cefsaedu-my.sharepoint.com/:v:/g/personal/062200020_faculdade_cefsa_edu_br/EQa5sCo4iAtNgmNZTpKO-20Bk0jWdXjKcx3gzEH8FDNQCA?nav=eyJyZWZlcnJhbEluZm8iOnsicmVmZXJyYWxBcHAiOiJPbmVEcml2ZUZvckJ1c2luZXNzIiwicmVmZXJyYWxBcHBQbGF0Zm9ybSI6IldlYiIsInJlZmVycmFsTW9kZSI6InZpZXciLCJyZWZlcnJhbFZpZXciOiJNeUZpbGVzTGlua0NvcHkifX0&e=cZkJZZ

In summary, I want to connect my code to the OPC UA server to send a signal to the OPC UA monitor and simultaneously transmit this signal through the OPC UA server to the Siemens software. Is it possible to establish this communication between both systems at the same time?