20:18, EET
February 2, 2017
Hello,
The client connection will close and then after reconnecting will report a “Sequence number mismatch”. Following this the client will continue to connect then disconnect every second or so. What steps can be taken to fix this problem?
[2017-02-02 15:42:23,366] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : OpcMonitoredDataItemListener – Data item opc.tcp://10.50.10.10:53530/ns=2;s=test.T1.TakeOff1 changed to: 16323
[2017-02-02 15:42:25,359] [TcpConnection/Read] INFO — : TcpConnection – /10.50.10.10:53530 Closed (graceful)
[2017-02-02 15:42:25,359] [TcpConnection/Read] INFO — : TcpConnection – /10.50.10.10:53530 Closed
[2017-02-02 15:42:25,359] [TcpConnection/Read] INFO — : SecureChannelTcp – 1766099742: Error recovery = true
[2017-02-02 15:42:25,360] [Blocking-Work-Executor-4] INFO — : TcpConnection – /10.50.10.10:53530 Connecting
[2017-02-02 15:42:25,561] [Blocking-Work-Executor-4] INFO — : TcpConnection – /10.50.10.10:53530 Connected
[2017-02-02 15:42:25,563] [TcpConnection/Read] WARN — : TcpConnection – /10.50.10.10:53530 Sequence number mismatch: 255 vs. 257
[2017-02-02 15:42:25,564] [TcpConnection/Read] INFO — : TcpConnection – /10.50.10.10:53530 Closed
[2017-02-02 15:42:25,564] [Blocking-Work-Executor-6] WARN — : UaClient$a – onError:
org.opcfoundation.ua.common.ServiceResultException: Bad_UnexpectedError (code=0x80010000, description=”Sequence number mismatch”)
at org.opcfoundation.ua.transport.tcp.io.TcpConnection$ReadThread.run(Unknown Source)
[2017-02-02 15:42:25,565] [Blocking-Work-Executor-5] WARN — : UaClient$a – onError:
org.opcfoundation.ua.common.ServiceResultException: Bad_UnexpectedError (code=0x80010000, description=”Sequence number mismatch”)
at org.opcfoundation.ua.transport.tcp.io.TcpConnection$ReadThread.run(Unknown Source)
[2017-02-02 15:42:25,566] [Blocking-Work-Executor-7] WARN — : UaClient$a – onError:
org.opcfoundation.ua.common.ServiceResultException: Bad_UnexpectedError (code=0x80010000, description=”Sequence number mismatch”)
at org.opcfoundation.ua.transport.tcp.io.TcpConnection$ReadThread.run(Unknown Source)
[2017-02-02 15:42:25,566] [TcpConnection/Read] INFO — : SecureChannelTcp – 1766099742: Error recovery = false
[2017-02-02 15:42:25,882] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : OpcServerStatusListener – Server state changed from Running to CommunicationFault
[2017-02-02 15:42:25,882] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] ERROR — : OpcServerStatusListener – Communication Fault server state
[2017-02-02 15:42:25,985] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : SecureChannelTcp – 1766099742 Closed
[2017-02-02 15:42:25,986] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : TcpConnection – /10.50.10.10:53530 Connecting
[2017-02-02 15:42:26,189] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : TcpConnection – /10.50.10.10:53530 Connected
[2017-02-02 15:42:26,201] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : Subscription – Requesting missing NotificationMessage (SequenceNumber=371) from the server using Republish: Target SequenceNumber=371
[2017-02-02 15:42:26,202] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : Subscription – Message not available
[2017-02-02 15:42:26,202] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : UaClient – reconnect: Reconnected to server (session reactivated)
[2017-02-02 15:42:26,203] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : OpcServerStatusListener – Server state changed from CommunicationFault to Running
[2017-02-02 15:42:49,368] [PublishTask-com.prosysopc.ua.client.UaClient@5c18016b] INFO — : OpcSubscriptionAliveListener – Thu Feb 02 15:42:49 UTC 2017 Subscription timeout: ID=2 lastAlive=Thu Feb 02 15:42:23 UTC 2017
15:23, EET
April 17, 2013
Hello,
The “Sequence number mismatch: 255 vs. 257” error statement means that there’s a packet with sequence number 256 missing. So, it seems like there’s some response packets missing in the communication.
What version of the Prosys OPC UA Java SDK are you using? And what is the server application that you are connecting to?
Could you log a more complete log file for example with logging level DEBUG and send it to uajava-support prosysopc.com mailing list?
Most Users Ever Online: 1919
Currently Online:
25 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
Heikki Tahvanainen: 402
hbrackel: 144
rocket science: 88
pramanj: 86
Francesco Zambon: 83
Ibrahim: 78
Sabari: 62
kapsl: 57
gjevremovic: 49
Xavier: 43
Member Stats:
Guest Posters: 0
Members: 730
Moderators: 7
Admins: 1
Forum Stats:
Groups: 3
Forums: 15
Topics: 1529
Posts: 6471
Newest Members:
HypromeImpupe, toneylapham544, rondawolinski7, Marypof5711, roycedelargie91, kourtneyquisenbe, ellis87832073466, zkxwilliemae, gabriellabachus, DeakinModerators: Jouni Aro: 1026, Pyry: 1, Petri: 0, Bjarne Boström: 1032, Jimmy Ni: 26, Matti Siponen: 349, Lusetti: 0
Administrators: admin: 1